Waterproof Pocket Conductivity Tester

WATERPROOF POCKET CONDUCTIVITY TESTER

CONSCAN series waterproof pocket conductivity tester

nclude the CONSCAN20, 30 and 40. The meters are

used to measure electrical conductivity value of liquids

without temperature compensation function. 

Applications:
CONSCAN20 is used to measure low conductivity liquids.
E.g. Pure water, Distilled water etc.
CONSCAN30 is used to measure general conductivity
liquids. E.g. Tap water, Table-water etc.
CONSCAN40 is used to measure high conductivity liquids.
E.g. Waste water, Salt water etc. 

Single Point Push-Button Calibration:
CONSCAN series with one point calibration function. The
meter is permitted to use user-defined calibration
solution, you need only set conductivity value in meter

and immerse the electrode into standard solution, then

press [CAL] key, the meter will be calibrated automatically.
 

Hold Function:
The meter with hold function, press [HOLD] key, you can
freeze reading temporarily for easy viewing.
　

Replaceable Electrode:
CONSCAN series with platinum sensor, giving you quick,
reliable conductivity measurement. Double junction sensor,
you can replace it easily.

Auto-Power Off:
CONSCAN series will turn itself off approximately 8
minutes after last key pressed, it saves battery

power after non-use.

Waterproof Function:
The meter with good waterproof performance, It can

float when sink in water.

What's included:
1.5V alkaline button cell batteries.